Light-Curing Systems

Light-Curing Systems

UV Light-Curing Systems

Spot Lamps, Flood Lamps, Focused-Bean Lamps; Conveyor Systems, and Accessories

Dymax offers a wide range of curing equipment including various spot, flood, and conveyor curing systems, as well as radiometers and other accessories. Since Dymax designs and manufactures its own curing systems, they are optimized to work with our adhesives, coatings, gaskets, and maskants to gain process efficiencies by targeting rapid surface curing, depth of cure, and speed of cure. All while delivering light in a rapid and economical way. CE marked equipment is available.

Product Highlight

BlueWave® QX4® LED Spot Cure System

The BlueWave® QX4® is a high-intensity spot-curing system, featuring all the benefits of LED-curing technology in a small and versatile unit. The system is comprised of a controller and up to four LED heads which are available in 365, 385, and 405 nm and can be outfitted with 3-, 5-, or 8-mm diameter focusing lenses. The LED heads and focusing lenses can be used in any combination and can be controlled through the system’s variable mode, a feature that allows each head to be individually programmed for intensity and cycle times. Individual exposure times and intensity settings can be set in 1% increments for each LED head, giving users maximum curing flexibility. Learn more…

Technical Assistance

Adhesive selection, process development, and product validation are critical to the success of any manufacturing process. We are dedicated to helping you find the correct adhesive and appropriate dispensing and curing equipment for your application. Application engineers are available to assist you with product and process design, testing, evaluation, and pre-production trials.

LIGHT-CURING EQUIPMENT
Conveyor Systems

Conveyor Systems


Dymax UV curing conveyor systems offer consistent, fast, and safe UV curing. These ultraviolet conveyors are designed for curing of UV curable adhesives, UV curable coatings, and UV curable inks and can be outfitted with standard metal halide (longwave UV), mercury (shortwave UV), or visible bulbs. Consistent line speed, lamp…
LEARN MORE
Conveyor Systems

Conveyor Systems


Dymax UV curing conveyor systems offer consistent, fast, and safe UV curing. These ultraviolet conveyors are designed for curing of UV curable adhesives, UV curable coatings, and UV curable inks and can be outfitted with standard metal halide (longwave UV), mercury (shortwave UV), or visible bulbs. Consistent line speed, lamp…
LEARN MORE
Curing System Accessories

Curing System Accessories


Dymax offers a line of accessories to improve your UV/Visible light curing process from bulbs and lightguides to radiometers and eye protection gear.
LEARN MORE
UV Light-Curing Flood and Focused Beam Systems

UV Light-Curing Flood and Focused Beam Systems


A Dymax UV curing system uses moderate- to high-intensity UV/Visible light for the fast curing of UV adhesives, UV coatings and UV inks. A modular UV curing flood lamp consists of a power supply, reflector housing, and standard 400 Watt metal halide bulb. Shutter assemblies, mounting stands, UV shields, and…
LEARN MORE
Curing Systems Lightguides

Curing Systems Lightguides


Available in Two-Pole, Three-Pole and Four-Pole Configurations Dymax offers a broad range of liquid lightguides to deliver high intensity UV light efficiently from UV spot lamp curing systems. Liquid lightguides are the most economical means for delivering high intensity UV light to adhesives and coatings. Superior Dymax technology minimizes degradation…
LEARN MORE
Radiometers

Radiometers


Dymax UV and visible radiometers are simple to operate and allow operators to monitor and document a UV/Visible light curing process. A low UV/Visible intensity measurement signals an operator to replace the bulb, reflector, or lightguide. Radiometers can also be used to confirm that operators are properly shielded from UV/Visible…
LEARN MORE
Curing Systems Shields and Stands

Curing Systems Shields and Stands


Shields and Stands for UV Light-Curing Systems Dymax shields are designed as protection from ultraviolet and visible light while allowing clear visibility of curing parts. All enclosures allow for height adjustment. The Light Shield enclosure offers 360° of protection and is used with Dymax flood and focused beam lamps and…
LEARN MORE
Shutters

Shutters


Dymax shutters were developed as auxiliary device to use with Dymax flood lamp systems. Shutters are a recommended safety feature to prevent operator exposure to ultraviolet and visible light when lifting shields while systems are operating. Shutters are used to control the dose of radiant energy directed onto parts in…
LEARN MORE
Shutters

Shutters


Dymax shutters were developed as auxiliary device to use with Dymax flood lamp systems. Shutters are a recommended safety feature to prevent operator exposure to ultraviolet and visible light when lifting shields while systems are operating. Shutters are used to control the dose of radiant energy directed onto parts in…
LEARN MORE
Spot Lamp Systems

Spot Lamp Systems


Dymax UV light spot cure units typically cure UV and visible light-curable adhesives and coatings in 1 to 10 seconds. These UV light-curing units are ideal for R&D laboratory environments as well as low- and high-volume production applications in medical, industrial, electronics, automotive, and optical industries. Dymax UV spot-curing units…
LEARN MORE